Contact Lens Solution, 12.3 oz details:
Suggested Use
To clean, rinse, disinfect and remove protein daily, these 'rub and rinse' steps must be completed:
Prior to First Use: Note: For your protection, this bottle has a sealed, built in dropper tip. Do not use if seal is opened, damaged or missing at time of purchase.
- Completely remove screw cap from bottle
- Remove plastic safety ring from bottle neck and discard
- Replace screw cap on threaded bottle neck
- To open bottle, turn self-piercing screw cap clockwise to break the dropper-tip seal
- Your bottle is ready to use
- Thoroughly wash hands before handling contact lenses
Instructions for Use: 'Rub and rinse' directions are for all contact lens replacement schedules
Step 1 - Cleaning and Protein Removal:
Completely soak each side of your contact lens with PrimaLens Multi-Purpose Solution. Rub lens in the palm of your hand using the forefinger of the other hand for approximately 20 seconds. Be sure to rub and clean both sides. No separate daily cleaner is necessary.
Step 2 - Rinsing:
Thoroughly rinse each side of each lens for 10 seconds with PrimaLens Multi-Purpose Solution to remove all debris.
Step 3 - Disinfection and Storage: Fill your contact lens case with PrimaLens Multi-Purpose Solution and place the lenses in the appropriate storage compartments. Close case and tighten. Allow lenses to soak for at least 4 hours.
Your lenses are now ready to wear. No saline rinse is necessary. If any debris remains on contact lenses, rinse with PrimaLens Multi-Purpose Solution. Always follow your eye care professional's instructions. Based on your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend the use of a separate enzymatic cleaner before Step 1.
Long Term Storage:
Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days. Please discard bottle 60 days after opening.
Protein Removal:
PrimaLens Multi-Purpose Solution removes protein from contact lenses while you clean and disinfect.
Supplement Facts Contains: PrimaLens Multi-Purpose Solution is a sterile, isotonic, buffered solution containing boric acid, sodium chloride, Hydroxypropyl Methylcellulose (HPMC) as a lubricant, Poloxamer 407 as a surfactant, disodium edetate as chelating agent, purified water and preserved with 0.00015% Polyhexanide.
If you are allergic to any of the above ingredients do not use this product.
Warnings
To avoid contamination never touch the tip of bottle to any surface. Keep the bottle tightly closed when not in use.
Keep out of reach of children.
Store at room temperature.
Tamper Evident:
For your protection, this bottle has a sealed built-in dropper tip. Do not use if seal if opened, damaged or missing at time of purchase.
Consult an eye care professional for additional advice on lens care.
